ballast 10

Ballast Standard 10° – 60kg

33.00 €

SKU: ballast10
Avaibility : In stock
Categories: ,

With 10° ballast of the Sun Ballast line, wind loads resistance of more than 150 km/h are achieved, as demonstrated by the tests carried out in the wind tunnel, which means reduced loads (Kg/m2) in coverage. Its weight of 60 kg allows you to fix the photovoltaic panels without risk, which means simplicity and speed of installation, saving time for the construction of a plant.

Sun Ballast 10 ° fixing system is realized of vibrated and reinforced concrete and allows an inclination of 10 °. The material with which the ballast is made has an exposure class XC4 as well as a resistance class of C32 / 40.
It performs both the function of support and ballast to the photovoltaic panels and must not be fixed on the roof but only supported. During installation, a rubber protective sheath is placed between the support and the cover.
The photovoltaic panels are hooked onto the support equipped with an M8 bushing by means of special central clips and the orientation of the module can be horizontal or vertical.

Technical specification:

  • APPLICATION: Any type of flat roof with a maximum slope of 5 º; on the ground, on beaten ground with inert material or pavements
  • MODULE INCLINATION: 10°
  • QUANTITY PER PALLET: 10
  • BALLAST WEIGHT: 60Kg
  • PALLET DIMENSIONS: 70 cm x 98 cm h = 58 cm
  • DISTANCE BETWEEN PANELS: From 60 cm to 100 cm
  • TOTAL PALLET WEIGHT: 600 Kg
  • ORIENTATION OF THE PV MODULE: Horizontal, Vertical
  • PV PANEL SIZE: Standard 1650×1000 panel or similar.

Datasheet

BALLAST 10°

Weight 60 kg