BALLAST ANGLE 5° SAIL-SHAPED SYSTEM

Ballast angle 5° sail-shaped system

SKU: sail shaped5
Avaibility : In stock
Categories: ,

Sun Ballast 5 Sail system is realized of vibrated and reinforced concrete and allows an inclination of 5 °. The material with which the ballast is made has an exposure class XC4 as well as a resistance class of C32 / 40.
It performs both the function of support and ballast to the photovoltaic panels and must not be fixed on the roof but only supported. During installation, a rubber protective sheath is placed between the support and the cover.
The photovoltaic panels are hooked onto the support equipped with an M8 bushing by means of special central clips and the orientation of the module can be horizontal or vertical.

Sun Ballast 5° Sail system has been designed to take advantage of all the available coverage surface by optimizing the construction of the photovoltaic system.

This system allows to recover the area usually left for shading between the rows. With the same space you can get to install about 20% more modules compared to a traditional system. Also used in shorter sails or single rows allow you to raise the front of the plant up to 60 cm from the floor, reducing exposure to shadows given by any other structures present (railings, fireplaces, etc.). It is possible to place the panels both horizontally and vertically.

Technical specification:

  • APPLICATION: Any type of flat or low-pitched roof with up to 5° slope, on the ground, on hard court with inert material or on paving
  • MODULE INCLINATION: 5°
  • QUANTITY PER PALLET: 16
  • BALLAST WEIGHT: 39 Kg
  • PALLET DIMENSIONS: 110 cm x 98 cm h =35 cm
  • DISTANCE BETWEEN PANELS: From 40 cm to 80 cm
  • TOTAL PALLET WEIGHT: 324 Kg
  • ORIENTATION OF THE PV MODULE: Horizontal, Vertical
  • PV PANEL SIZE: Standard 1650×1000 panel or similar.

Datasheet

SAIL SHAPED 5°

Weight 39 kg