Additional Weights 30 KG (for Connect and Cablowind System)
Additional Weights 30 KG (for Connect and Cablowind System)
Ballast 0°
Sun Ballast 0 ° structure is an optimal solution when there are situations such as: limited floor load, limited spaces and landscape constraints. This specific solution achieves the goal of placing more panels in less space without it being visible from the outside. There is also a raised version in case you need to stand higher than the surface.
Ballast angle 11° sail-shaped system
The 11°.3 Ballast fixing system in the Sun Ballast line is made from unreinforced concrete triangles that allow a tilt angle of 11°. It has XC4 exposure class, as well as a strength class of C32/40.
Ballast angle 5° sail-shaped system
Sun Ballast 5 Sail system is realized of vibrated and reinforced concrete and allows an inclination of 5 °. The material with which the ballast is made has an exposure class XC4 as well as a resistance class of C32 / 40.
It performs both the function of support and ballast to the photovoltaic panels and must not be fixed on the roof but only supported. During installation, a rubber protective sheath is placed between the support and the cover.
The photovoltaic panels are hooked onto the support equipped with an M8 bushing by means of special central clips and the orientation of the module can be horizontal or vertical.
Ballast Standard 10°
With 10° ballast of the Sun Ballast line, wind loads resistance of more than 150 km/h are achieved, as demonstrated by the tests carried out in the wind tunnel, which means reduced loads (Kg/m2) in coverage. Its weight of 60 kg allows you to fix the photovoltaic panels without risk, which means simplicity and speed of installation, saving time for the construction of a plant.